Does anyone else find themselves recalling random facts for no apparent reason? Like,

Charlie Chaplin entered a Charlie Chaplin lookalike contest and lost

    • Nomecks@lemmy.ca
      link
      fedilink
      arrow-up
      11
      ·
      edit-2
      10 months ago

      California Cows Don’t Dance the Fandango

      Steps for laser printing:

      Cleaning, Charging, Drawing, Developing, Transferring, Fusing

      I’ve known this for over 20 years and never used it. Thanks catchy mnemonics!

    • mangaskahn@lemmy.world
      link
      fedilink
      arrow-up
      10
      ·
      10 months ago

      Are you making a crossover cable or installing it for the government? Those are the only places that I know of that A is used regularly. Nearly everywhere else uses B in my experience.

      • slazer2au@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        10 months ago

        Are you making the assumption I am from North America?

        Every place I have worked in Australia and Europe uses green first.

      • indepndnt@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        10 months ago

        Really? I wasn’t sure which one I “should” use so I looked at a cable that I had laying around (probably came with a cable modem or something?) and was able to see the wire colors through the connector and it was A. So that’s what I’ve been using when making patch cables or wiring my house.

        I guess my question is what’s your experience with where B is used? Mostly I’m just curious, it probably doesn’t really matter for me since I only do networking work in my house.

        • Nollij@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          3
          ·
          10 months ago

          It shouldn’t actually matter. It’s strictly by convention that the US (and probably North America; unclear about beyond) almost exclusively uses B. The big risk is that people will assume it’s B, and the other end is B, which can cause issues when they e.g. replace a receptacle and make all of your connections crossover. But even that shouldn’t matter much these days.

          There’s also some very limited issues switching from A to B on the same line (A in wall, B in patch cable), but this is very rare. If you saw A, it was probably either a crossover, or you live in a place that uses A.