I’m looking for a suggestion for compact-ish NAS cases. I only have a few drives, 4 at the moment, so I don’t need a ton of space. But I’d like to downsize without getting a brand new motherboard and PSU it possible (both are ATX at the moment).

My main requirement is being able to install and uninstall drives without worrying about cable management.

Thanks!

  • spez_@lemmy.worldEnglish
    1·
    1 year ago

    I got an Argon Eon case with a Raspberry Pi 4, but I’m regretting it because for some off reason my file transfer speeds via SMB are abysmal. I do have a heap of services selfhosted on the Pi and otherwise it’s okay

    Edit: If someone was able to get fast transfer speeds via SMB on a Raspberry Pi, I’d like to know how. If the speeds can be increased, my NAS would be perfect

        • randombullet@lemmy.worldEnglish
          2·
          1 year ago

          Try this in your SMB settings in OMV.

          socket options = TCP_NODELAY SO_RCVBUF=65536
SO_SNDBUF=65536
read raw = yes
write raw = yes
max xmit = 65535
dead time = 15
min receivefile size = 16384
write cache size = 524288
getwd cache = yes
max connections = 65535
max open files = 65535
min protocol = smb3
max protocol = smb3
    • Resurge@lemmy.mlEnglish
      2·
      1 year ago

      This is interesting since I was planning on making my own RPi4 nas in the near future. Am I seeing correctly from the image that you have 1 (or 2?) 3,5" HDDs connected to some kind of HAT for the RPi (which has SATA connectors probably)?

      What speeds are you getting now?

      My plan was to connect 2x16TB HDDs to the pi through a USB->SATA cable, which probably is an even less stable setup than yours is but I was hoping it would be enough to do some basic NAS stuff.
      I was also planning on using OpenMediaVault like you are.

      • spez_@lemmy.worldEnglish
        1·
        1 year ago

        I have two 3,5" HDDs connected as well as two SSDs (installed after the picture). They’re connected via a USB dongle (through the back, so all drives go via USB 3.)

        The issue I’m facing is that I only get 10MB/s, even though I should be getting more, even through a USB 3 interface. I’m going to try the suggested SMB configuration from another user and report back shortly

        Your setup should be similar to mine. If you get good speeds, I’d love to know. OpenMediaVault is wonderful too - it’s simple and gets the job done. But for my system there’s no RAID, although that doesn’t bother me because 1 HDD is primary, and 1 HDD is backup

        • Resurge@lemmy.mlEnglish
          2·
          1 year ago

          Ah so your setup is almost exactly as what I had planned :D (I’ll use 1 SSD instead of 2 though, to be used as boot drive). I haven’t made the box yet, probably in a few months.

          Thank you for the reply!
          Please do post your updates somewhere in this thread, I’m sure they’ll come in handy when I start building my box.

  • rambos@lemmy.worldEnglish
    1·
    1 year ago

    All compact atx cases were too expensive for my liking, so I decided to make one. I should probably not suggest a case made of plastic, but if you have access to a 3D printer check this out. 288x207x343 mm in size and it can house full size ATX mobo and PSU and 3x 3.5" or 7x 2.5". Colling is silent and good, but I didnt test with more powerfull CPU or 3.5 HDDs

  • Captain_Ender@kbin.social
    32·
    1 year ago

    Oh man I just said in another thread we need a HomeLab here, give it a Google - they have a pretty good discord if you want to avoid the Reddit

  • Corgana@startrek.websiteEnglish
    1·
    1 year ago

    Check out ASrock’s Deskmini A300 or X300. They are barebones setups with Mini-STX motherboards. Space for two 2.5" hdd and two m.2 slots as well.