• FierySpectre@lemmy.world
    link
    fedilink
    English
    arrow-up
    23
    arrow-down
    1
    ·
    3 months ago

    One of those cables that don’t work is rated for like 120W, with gigabit transfer speed… But it refuses to transmit display… Like bruh

      • FierySpectre@lemmy.world
        link
        fedilink
        English
        arrow-up
        17
        ·
        edit-2
        3 months ago

        Didn’t really think about that one but you’re right damn… (Looked it up, and it depends on the bit depth etc, but it’s around 3.2Gbps for the display settings if I’m correct)… So that explains a lot

        Gigabit is capable of like 720p@30Hz which it probably should be able to fall back on, but I understand why they wouldn’t do that haha. 1080p@15Hz is also possible :)

      • zarenki@lemmy.ml
        link
        fedilink
        English
        arrow-up
        7
        ·
        3 months ago

        USB-C video is usually DisplayPort Alt Mode, which uses a completely different data rate and protocol from USB.

        Even using old 2016 hardware, a computer and USB-C cable that both only support 5 Gbps USB (such as USB 3.1 Gen 1) can often easily transmit an uncompressed 4K 60Hz video stream over that cable, using about 15.7Gbps of DisplayPort 1.2 bandwidth. Could go far higher than that with DP 2.0.

        Some less common video-over-USB devices/docks use DisplayLink instead, which is indeed contained within USB packets and bound by the USB data rate, but it uses lossy compression so those uncompressed numbers aren’t directly comparable.