Another option is subpaths: xyz.ddns.net/portainer
Just one open port, to your reverse proxy (nginx or other).
The client updating no-ip with your dynamic IP is independent of the reverse proxy software.
Another option is subpaths: xyz.ddns.net/portainer
Just one open port, to your reverse proxy (nginx or other).
The client updating no-ip with your dynamic IP is independent of the reverse proxy software.
This sounds like a FOSS utopian future :)
There’s a few projects that have started towards this path with single-click deployable apps, you could even say HomeAssistant OS does this to some extent my managing the services for you.
I believe one of the biggest hurdle for a “self hosting appliance” is resilience to hardware failure. Noone wants to loose decades of family photos or legal documents due to a SSD going bad , or the cat spilling water on their “hosting box”. So automated reliable off-site backups and recovery procedures for both data and configs is key.
Databox from BBC / Nottingham University is also a very interesting concept worth looking in to:
A platform for managing secure access to data and enabling authorised third parties to provide the owner authenticated control and accountability.
Probably more what MangoKangoroo and B0rax talked about, that enterprises can opt out of this telemetry, due to compliance or Intellectual Property protection.
So only the commoners get mandatory full-scale surveillance, Ehm I mean “ai enhancement”
Why did they have their own builds of these projects in the first place? Did they have custom patches they maintained?
I know your pain! (Cries in Nvidia laptop) when i bought mine i literally couldn’t find a laptop with AMD graphics in my region.
There is some hope these days. In addition to the previously mentioned Frameworks laptop, there’s also this TUXEDO Sirius 16 - Gen1. (Tuxedo is a German company specializing in Linux-compatible computers). It might not be exactly what your looking for, but AMD graphics laptops are so few and far between I thought I should put it out there.
I third Proxmix
I run most stuff as Docker images inside a VM, but also a few services as LXC containers and some non-docker stuff in other VMs
Suddenly I feel very happy (and a little bit smug) about my 2 year old Sony Xperia which both a notification LED, headphone jack and micro SD card slot.
But a replacable battery is sorely lacking…
I think I’ll go with the latest Fairphone when my current needs replacement, but I’m a bit worried about it’s lack of water resistance
Maybe it’s a different culture, or matter of car and people density, but in my country (Norway) most people cycle on the sidewalk. Including kids of course, from the age of 10 they can cycle to school instead of having to walk.
Many footpaths here are also officially designated “cycling and walking paths”. Generally the only cyclists you see in the road are sports cyclists in racing bicycles and tight skin suits.
The thinking here is that cyclists and pedestrians are both “soft traffic participants” so they share a space, while “hard traffic participants” like cars, trucks and motorcycles are kept separate.
Pedestrians do have right of way over cyclists. As the heavier faster party, cyclists have the responsibility to avoid conflict, by giving right of way, and slowing down and/or chiming their bell to signal their presence before passing pedestrians.
Personally, if I was told that tomorrow I’m only allowed to cycle on the road, I would get rid of my bike. If I’m gonna be on the road full of lorries busses and SUVs going 60kph, I’d rather just be in my car. It’s just not worth the risk and constant peril. This is in a more suburban and industrial/commercial setting, where the sidewalks have gaps to buildings, and pedestrians are far apart.
I can however see how in a dense, crowded downtown area where the cars mostly drive slow and the sidewalks are dense with people, that cycling in the road makes more sense.
Thinking about it the only roads with 30kph limit and a sidewalk are in the very center of the city. All other places with 30kph are basically neighbourhoods etc where there are no sidewalks and everybody shares the road. Roads here with a dedicated sidewalk also have higher speed limits that what a casual cyclist can achieve
People often rode them on sidewalks posing a danger to people walking.
I’ve seen this sentiment around, but where else are you supposed to ride eScoooters and bicycles? Of course ideally they belong in the bike lane, but most places don’t have bike lines, so the alternatives are sidewalks or in the road with cars.
If we’re gonna get people out of cars, we need to recognize that walking+transit doesn’t work for everyone a lot of people and that a bicycle/ eScooter is the solution (look at Amsterdam/ Copenhagen how well bicycles work) , but bike lanes don’t get built overnight, especially when few people cycle, if their banished from the safe sidewalk and only allowed to cycle in the dangerous road.
(I’ve lumped bikes and eScooters together since they both solve the same problem of rapid personal transport, both having speeds of 20-30 kph which is significantly more than pedestrians but less than cars)
How much of this is Spotify’s fault and how much is the major record labels sitting between Spotify and the individual artists?
And is there a better place for us consumers to go and vote with our wallet? Ideally somewhere that isn’t one of the 5 major tech giants that control everything
Like taiyang said, SteamOS is based on Arch which is super not newbie friendly, but the desktop modes “desktop environment” is KDE which available on pretty much any Linux distro, including beginner friendly ones like (K)Ubuntu and Fedora (although I’m not sure how beginner friendly Fedora is, regarding proprietary drivers and codecs)
+1 for SSH and FileZilla (or WinSCP)
Like others said it’s mostly just practice.
What helps is to align the (short) ends and hold them flat between your index finger and thumb. Use your free hand to get them in order. Once they’re in order, keep holding them still between your index finger and thumb using one hand, then use your free hand to slot on the connector
Edit: also bending them back and forth a bit will soften them up and reduce them curling in all sorts of directions. It also weakens them, so don’t overdo it (mostly only works for solid cable, the type meant for permanent installations like inside walls)
What’s the deal with the timezone?
This is a very outdated take. With SteamPlay and Proton most games these days are literally just click Install click Play. The main exceptions are VR and certain competitive games with invasive AntiCheat where the devs has not enabled Linux support.
These days you should not need fiddle with Wine directly, Proton, Lutris etc should handle Wine for you
Kate on Linux, Notepad++ on Windows.
Also, Kate on Windows (it’s really good)
Wow that’s awesome! Props to etnoy for creating such a polished PR for this feature
I can’t wait to simply point immich at my existing photo structure :)
For RPi the two major causes of issues (in my experience) are low spec power supplies and low spec SD-cards.
Power supplies drop voltage when the loads gets too high, which is especially pronounced with high power USB devices like external harddrives.
SD-cards tend to get worn out or give write errors after enough writes. Class 10 SD cards are recommended for both speed and longevity. And ideally try to avoid write intensive stuff on the SD card
In addition to everything else said here, what has crystallized over the last year is how good it feels that Linux and other open source initiatives are Enshitification-proof
This I believe is a big part of what give the warm and fuzzy feeling when using open source software and website. Generally everyone involved wants to make something good, without looking towards IPOs or the next quarterly revenue at the cost of the software
(Sure controversies happen, but they are generally few and far between, and open source licensing ensure forking is a viable last resort, like with LibreOffice and Nextcloud)
This happens when a small project has 12 developers each scratching their own itch in their own time, not a team of 120 developers getting paid to work on the same itch 8 hours a day.
In the case of FreeCAD they’re actually starting to reign in and focus more now, and there are more contributors.