A big one for me is Microsoft office (desktop), Libreoffice and other FOSS alternatives just simply don’t come close, and feature wise are 20 years behind. Especially since I basically mastered MS office 2007+'s drawing features, which the FOSS alternatives don’t replicate very well.
And of course Microsoft loves to push Office 365. I don’t pay for that and just use desktop office, but Microsoft prefers you don’t know that you can do this.
And I’m going to get shit on by Lemmy big time for this but while Linux is great and has made vast improvements in recent years, I still use Windows, not only because of MS office, but because a lot of games tend to only support Windows. I know that wine and proton exist but they’re not perfect and don’t feel quite the same as running native.
I wish an operating system existed with a hybridized Linux and clone NT kernel (using code from FOSS Wine and ReactOS of course) so that the numerous back catalog of NT software can run similar to as intended while also interacting with Linux programs better and using a shared environment. Since it would probably become vulnerable to viruses for windows as well, maybe? (my programming knowledge is extremely rusty) an antivirus similar to Windows defender is bundled with the operating system. Hopefully if someone makes such an operating system it can be a Windows killer and would switch immediately
A decent alternative to Adobe InDesign or Affinity Publisher
Obd2 software so I can diagnose and repair my car. This is more than a dtc scanner, I need to be able to trend values and flash/program modules without a $15k tablet with $50k of yearly software.
Libreoffice and other FOSS alternatives just simply don’t come close
I really only use Word and Excel, and I find the FOSS alternatives just fine. I can understand if power-users might find the newer features worthwhile, but for basic word processing and spreadsheets the FOSS options are good enough.
It’s not. Writer will start crashing at 50 pages, it become a pretty much unusable as you add more text.
I guess it depends a lot on what you think of as “an alternative”. I’m really happy using FOSS because I generally try to find a different angle on things, and it allows me to do that.
Luckily I’m not dependent on using common office software, the few spreadsheet tasks that I need can be done with online tools, either open or proprietary. For documents I usually use markdown and pandoc. For music making, I use my own software or Ardour for mastering, etc. For modeling and 3D printing I started using OpenSCAD.
There’s also many things that proprietary software just can’t do. Like, my day-to-day workflow is based on a minimalist approach to computing, with the most common operations being very easy to perform (browser, editor, terminal) … MacOS is always hailed for their great UI but honestly, it seems slow and clunky to me even though I used it daily for a long time …
Not as in “FOSS alternative”, as it is already open, but simply a Linux version: Tortoise SVN, the file manager integrated UI for SVN. That is actually one of the two things missing in the Linux portfolio. The other being a native port of Notepad++, although this at least runs fine under wine.
these guys are doing Notepad++ in Qt: https://notepadqq.com/s/
I’m not sure I follow. LibreOffice is at least as good (if not better) than Offics365 unless maybe if you’re doing advanced shit in Excel, or need specifically coded macros.
Considering Microsoft’s push to make everything into a webwrapped application, I think LibreOffice is only going to be a better and better alternative as time moves on.
For excel stuff, https://www.visidata.org/ is way, way better than excel assuming the data is tabular (which, frankly, it should be anyway). Like it’s not even close.
I mean LO is pretty good, but it is a bit rough to find what you want. At a min its more difficult to format your sheets in LO.
https://www.visidata.org/ is way, way, way, way better than excel and it’s FOSS.
As for the rest:
- I don’t really miss Word because WYSIWYG editing is just kinda bad across the board. Much better to write with markup rather than fighting an auto-formatter all the time.
- I thankfully have not needed to make much of any PowerPoints, but I think I would probably feel similarly about them and want them in some kind of markup language as well.
- Teams just sucks ass compared to many other alternatives, though I’m admittedly not familiar with good FOSS ones
- Outlook is basically just a dinosaur and there’s a million ways to do email better. Frankly, FOSS has it beat by a huge margin
The rest of Office isn’t really even worth talking about tbh.
@VirusMaster3073 music DAWs. I think the only real option is Ardour, but I tried it and was struggling to just figure out how to create a couple instrument tracks. Could be skill issue, but honestly I’m pretty good at figuring out UIs so if I was struggling a lot with the basics, it’s probably not just me. So I’m still on garageband for now which doesn’t get in my way when I’m trying to make music
Hmm I think the issue is that Ardour is more focused on recording than electronic music production … There’s more intuitive DAWs out there but I suppose in terms of what it can do it doesn’t have to stand back … compared to ProTools I’d say it’s still quite intuitive (not a high bar for sure).
Reaper is awesome. It is dirt cheap. Also runs on linux. But then you have the VST issue
Give reaper a shot. I honestly don’t know if it’s FOSS but it runs in donations and is pretty good imo
Totally agree. The DAW space is depressingly neglected as FOSS and I can’t imagine why. 15 years ago I was certain there would one day be a FOSS DAW that had the same love put into it as Blender.
The entire phone-based ecosystem.
Adobe After Effects!! PLEASE DEAR GOD
This is the singular thing still keeping me using Adobe software. If this was replaced then I could be FREEE
I’m curious how DaVinci resolve’s fusion page compares?
I can’t answer that, but the reason I’m typing this from Windows is that getting DiVinci to reliably work in linux has been a pain in my ass.
MS Office isn’t better than LibreOffice and OnlyOffice, they all do the same task of making docs, spreadsheets, and presentations with very similar UI. It’s a no brainer to use the one that doesn’t bug you to use OneDrive.
Linux gaming has come a long way, especially with the introduction of things like Proton and popularisation of it by the Steam Deck. If you can play games on the Steam Deck, those games run on Linux :D
The main reasons (mind you, not only reasons) why people don’t just switch to Linux is:
- it’s different (humans naturally gravitate towards things they are familiar with)
- partly because Linux has a few things that are unintuitive to the average user (e.g. using terminal), but distros like Mint have mostly solved this issue
- Switching itself is really annoying (I would say I’m in this boat, but I’ve installed Linux on my old computers and will definitely do it again if I ever get a new computer)
I’m sorry but… 20 years behind? What new features has, say, Word even offered in the past 20 years beside that damn ribbon?
Xodo pdf annotator
It seems all pdf annotators are allergic to letting me have
- The ability to change the text I’ve highlighted without deleting the entire highlight
- Several different highlighter colours and opacities
They seem like really silly requirements, but they make a huge difference to how long it takes me to get through my readings for class.
Tax filing software
This seems like asking for faster horses. Your taxes should just be filed for you, then you can verify it, no?
It’s the only reason I keep a windows VM around. Windows is getting so naggy though. Every time I boot it up, it wants me to update it, install virus scanner and ser up my user on microsoft vs local.
3D CAD software. There are a few options out there (FreeCAD, LibreCAD, etc) and Blender is a thing that exists for more artistic 3D modeling. But they simply don’t hold a candle to the features and capabilities of the paid packages, which typically have costs in the 4-to-5-digit range. And I’m not talking the crazy high-end simulation options - those I understand, they’re hard - but basic modeling features.
Hell, I’d even settle for a CAD package that had some solid basic features and had a reasonable purchase cost. Unfortunately the few providers have the industry by the throat, and so your options are “free but terrible” and “you need a mortgage to use this”.
FreeCAD is getting better but it would really benefit for a big improvement in stability and UX
I use solidworks for makers which is actually affordable for private use. I prefer paying $50 a year over having to deal with freecad and I dont even use CAD software that often.
You beat me to it. The moment someone makes a FOSS cad program where the ui doesn’t suck a donkeys ball they will be the goat
I grew up learning organic modeling in blender and ever since I got a 3D printer, it’s just been so easy to make things with it as opposed to learning CAD. I’m getting better thanks to OnShape and FreeCAD 1.0 but I keep finding myself going back to blender because “it just works” once you understand how to setup scaling and snapping for manipulating vertices. Basically just setup your world measurements to metric and scale it to 0.001 and then every unit will be 1mm (helps me work within the 250^3mm space of my print bed, mentally) and export as stl.
There’s even a 3D printer toolbox add on that lets you analyze and fix problems like manifold edges and additional mesh tools like manifold extrude that speed up the process for good quality parts. CAD’s biggest advantage is the non linear history editing which is super powerful but you can definitely do non-destructive editing in blender using modifiers that only get applied at export time so you even have a functional equivalent if you’re organized and plan ahead a little.
I guess what I’m saying is, blender is amazing software and absolutely capable as a workhorse for 3D printing. You’re right that the multi-digit costing proprietary software is leagues better for designing digital parts and assemblies but blender is extremely flexible and not just for the more artistic side of things, you can make extremely technical parts with blender.
