• jordanwhite1@lemmy.world
    link
    fedilink
    English
    arrow-up
    35
    ·
    1 year ago

    I would documented everything as I go.

    I am a hobbyist running a proxmox server with a docker host for media server, a plex host, a nas host, and home assistant host.

    I feel if It were to break It would take me a long time to rebuild.

    • bmarinov@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      ·
      1 year ago

      Ansible everything and automate as you go. It is slower, but if it’s not your first time setting something up it’s not too bad. Right now I literally couldn’t care less if the SD on one of my raspberry pi’s dies. Or my monitoring backend needs to be reinstalled.

      • Notorious@lemmy.link
        link
        fedilink
        English
        arrow-up
        7
        ·
        1 year ago

        IMO ansible is over kill for my homelab. All of my docker containers live on two servers. One remote and one at home. Both are built with docker compose and are backed up along with their data weekly to both servers and third party cloud backup. In the event one of them fails I have two copies of the data and could have everything back up and running in under 30 minutes.

        I also don’t like that Ansible is owned by RedHat. They’ve shown recently they have zero care for their users.

        • echo@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          if by “their users” you mean people who use rebuilds of RHEL ig

        • constantokra@lemmy.one
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I didnlt realize that about ansible. I’ve always thought it was overkill for me as well, but I figured i’d learn it eventually. Not anymore lol.

  • TechieDamien@lemmy.ml
    link
    fedilink
    English
    arrow-up
    19
    arrow-down
    1
    ·
    1 year ago

    I would have taken a deep dive into docker and containerised pretty much everything.

    • spez_@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      I’m mostly docker. I want to selfhost Lemmy but there’s no one-click Docker Compsoe / Portainer installer yet (for Swag / Nginx proxy manager) so I won’t until it’s ready

    • howrar@lemmy.ca
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      Same for me. I’ve known about Docker for many years now but never understood why I would want to use it when I can just as easily install things directly and just never touch them. Then I ran into dependency problems where two pieces of software required different versions of the same library. Docker just made this problem completely trivial.

  • Showroom7561@lemmy.ca
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    Instead of a 4-bay NAS, I would have gone with a 6-bay.

    You only realize just how expensive it is to expand on your space when you have to REPLACE HDDs rather than simply adding more.

  • stanleytweedle@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    Buy an actual NAS instead of a rats nest of USB hub and drives. But now it works so I’m too lazy and cheap to migrate it off.

  • Anarch157a@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    I already did a few months ago. My setup was a mess, everything tacked on the host OS, some stuff installed directly, others as docker, firewall was just a bunch of hand-written iptables rules…

    I got a newer motherboard and CPU to replace my ageing i5-2500K, so I decided to start from scratch.

    First order of business: Something to manage VMs and containers. Second: a decent firewall. Third: One app, one container.

    I ended up with:

    • Proxmox as VM and container manager
    • OPNSense as firewall. Server has 3 network cards (1 built-in, 2 on PCIe slots), the 2 add-ons are passed through to OPNSense, the built in is for managing Proxmox and for the containers .
    • A whole bunch of LXC containers running all sorts of stuff.

    Things look a lot more professional and clean, and it’s all much easier to manage.

      • Anarch157a@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Can’t say anything about CUDA because I don’t have Nvidia cards nor do I work with AI stuff, but I was able to pass the built-in GPU on my Ryzen 2600G to the Jellyfin container so it could do hardware transcoding of videos.

        You need the drivers for the GPU installed on the host OS, then link the devices on /dev to the container. For AMD this is easy, bc the drivers are open source and included in the distro (Proxmox is Debian based), for Nvidia you’d have to deal with the proprietary stuff both on the host and on the containers.

  • thejevans@lemmy.ml
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    My current homelab is running on a single Dell R720xd with 12x6TB SAS HDDs. I have ESXi as the hypervisor with a pfsense gateway and a trueNAS core vm. It’s compact, has lots of redundancy, can run everything I want and more, has IPMI, and ECC RAM. Great, right?

    Well, it sucks back about 300w at idle, sounds like a jet engine all the time, and having everything on one machine is fragile as hell.

    Not to mention the Aruba Networks switch and Eaton UPS that are also loud.

    I had to beg my dad to let it live at his house because no matter what I did: custom fan curves, better c-state management, a custom enclosure with sound isolation and ducting, I could not dump heat fast enough to make it quiet and it was driving me mad.

    I’m in the process of doing it better. I’m going to build a small NAS using consumer hardware and big, quiet fans, I have a fanless N6005 box as a gateway, and I’m going to convert my old gaming machine to a hypervisor using proxmox, with each VM managed with either docker-compose, Ansible, or nixOS.

    …and I’m now documenting everything.

    • Wingy@lemmy.ml
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’ve had an R710 at the foot of my bed for the past 4 years and only decommissioned it a couple of months ago. I haven’t configured anything but I don’t really notice the noise. I can tell that it’s there but only when I listen for it. Different people are bothered by different sounds maybe?

  • misaloun@reddthat.com
    link
    fedilink
    English
    arrow-up
    5
    ·
    1 year ago

    I always redo it lol, which is kind of a waste but I enjoy it.

    Maybe a related question is what I wish I could do if I had the time (which I will do eventually. Some I plan to do very soon):

    • self host wireguard instead of using tailscale
    • self host a ACME-like setup for self signed certificates for TLS and HTTPS
    • self host encrypted git server for private stuff
    • setup a file watcher on clients to sync my notes on-save automatically using rsync (yes I know I can use syncthing. Don’t wanna!)
    • PhilBro@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Wireguard is super quick and easy to setup and use, I’d highly recommend to do that now. I don’t understand the recent obsession with Tailscale apart from bypassing cgNAT

      • misaloun@reddthat.com
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I don’t think there’s any significant downsides. I suppose you are dependent on their infrastructure and uptime. If they ever go down, or for any reason stop offering their services, then you’re out of luck. But yeah that’s not significant.

        The reason I want to do this is it gives me more control over the setup in case I ever wanted to customize it or the wireguard config, and also teaches me more in general, which will enable me to better debug.

  • ThorrJo@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    Go with used & refurb business PCs right out of the gate instead of fucking around with SBCs like the Pi.

    Go with “1-liter” aka Ultra Small Form Factor right away instead of starting with SFF. (I don’t have a permanent residence at the moment so this makes sense for me)

    • constantokra@lemmy.one
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Ah, but now you have a stack of PiS to screw around with, separate from all the stuff you actually use.

  • DilipaEli@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    To be honest, nothing. Running my home server on a nuc with proxmox and a 8 bay synology Nas (though I’m glad that I went with 8 bay back then!).
    As a router I have opnsense running on a low powered mini pc.

    All in all I couldn’t wish for more (low power, high performance, easy to maintain) for my use case, but I’ll soon need some storage and ram upgrade on the proxmox server.

  • Carter@feddit.uk
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    I recently did this for the second time. Started on FreeNAS, switched to TrueNAS Scale when it released and just switched to Debian. Scale was too reliant on TrueCharts which would break and require a fresh install every couple of months. I should’ve just started with Debian in the first place.

  • artificial_unintelligence@programming.dev
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    I would’ve gone with a less powerful nas and got a separate unit for compute. I got a synology nas with a decent amount of compute so I could run all my stuff on the nas, and the proprietary locked down OS drives me a bit nuts. Causes all sorts of issues. If I had a separate compute box I could just be running some flavor of Linux, probably Ubuntu and have things behave much more nicely

  • rarkgrames@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    I have things scattered around different machines (a hangover from my previous network configuration that was running off two separate routers) so I’d probably look to have everything on one machine.

    Also I kind of rushed setting up my Dell server and I never really paid any attention to how it was set up for RAID. I also currently have everything running on separate VMs rather than in containers.

    I may at some point copy the important stuff off my server and set it up from scratch.

    I may also move from using a load balancer to manage incoming connections to doing it via Cloudflare Tunnels.

    The thing is there’s always something to tinker with and I’ve learnt a lot building my little home lab. There’s always something new to play around with and learn.

    Is my setup optimal? Hell no. Does it work? Yep. 🙂