• 0 Posts
  • 157 Comments
Joined 1 year ago
cake
Cake day: June 15th, 2023

help-circle
  • If potential is key, I say keep the context of the MAID process but instead of outright death make it cryonics. Plus other potential relevant volunteer stuff and organ donation stuff lined up. Even if the initial cryonics technique is not even close to viable, other stuff could be transformative. If cryonics has any chance to work, things will get appreciably better in 300-or-so years right?

    Hopeful worst is my brain in a jar mostly playing VR and sometimes knitting yarn via robotic arms. Lots of ways it could be better. Also unlike traditional cyborg stuff with all-machine life-support, I would like to still have a complex microbiome if not taking it further with symbiosis.


  • My napkin guess is that this is some sort of specific process/tactic, either it only allows 1 2 levels of reclassification at a time or that was all that could be agreed on (with multiple agencies, likely the DEA limiting the pace). So either avoiding the Senate or the tiniest of steps that pretty much anybody will allow/defend. Slow-and-steady could be the plan, assuming Biden wins again and actually follows up.

    Well that and it probably really helps with the turning-a-blind-eye, like the difference between ignoring/acquitting a hit-and-run fender-bender versus ignoring/acquitting the act of treating a no-traffic intersection (in clear conditions) like a 4-way stop. Maybe it will be enough to reduce hostility and move the relevant overton window over time while avoiding pushback.

    EDIT: Looking at it more, this seems to be the department of HHS pressuring the DEA on clear medical use. As others say, the lower restriction might help further medical study which could in-turn result in further reclassification.


  • Reminder on Stockholm syndrome:

    According to accounts by Kristin Enmark (one of the hostages): the police were acting incompetently, with little care for the hostages’ safety.

    She had criticized the police for pointing guns at the convicts while the hostages were in the line of fire, and she had told news outlets that one of the captors tried to protect the hostages from being caught in the crossfire

    but the prime minister [Palme] told her that she would have to content herself with dying at her post rather than Palme giving in to the captors’ demands.

    Ultimately, Enmark explained she was more afraid of the police, whose attitude seemed to be a much larger, direct threat to her life than the robbers.

    Which could possibly be relevant here, particularly the civil war part.




  • Certainly not unable, but lots of factors seem like they would add to difficulty particularly if emulators didn’t exist (because cartridge-based storage, aging/costly hardware). Then there’s the idea of having a target on your back (or any tools that make it more viable) due to extremely litigious/malicious entities and to me it just seems like a niche that isn’t worth the extra time.

    I’m grateful for PC games under 100MiB. Closer to 10MiB is worthy of praise and below that may be half amazing. There is .kkrieger at only 95KiB for a 3D game (and that is another mealtime topic), but I think that is more interesting visually than it is for gameplay.

    Or to be clear, I see the “STILL” more for creating games for old proprietary hardware than for optimization itself.

    @Fiivemacs



  • My thought as well, the video Tom Scott did on the mountain town that has bespoke electric vehicles (and strict usage on them for needed business) comes to mind (R2oD1ZHNMFE). I don’t know how much is law and how much is companies not caring to cater to that market (even with designs that they sell in Europe), but Kei-like vehicles can still be affordable without being fully unsafe (but the issue of safety is more about the market making larger-and-larger trucks and SUVs, and lack of viable car alternatives paired with high speed limits).

    Higher cost really is not a fix. Other concerns like privacy seem like policy could mesh well with low-end (no internet connection, just-a-radio, common off-the-shelf parts, standards+no DRM etc). It would be nice for the option to exist in this space that US car companies are not trying to fill anyway.

    @Fiivemacs





  • I am once again saying: Why not hydroxyapitite? A form of calcium, same as our teeth/bones. It even has water management uses because it adsorbs other stuff like fluoride and lead, which actually makes finding info about its addition to water for the purpose of teeth health difficult.

    Though it seems like hydroxyapatite water would also make fluoride toothpaste even more effective.

    The mineral ions introduced during remineralisation restore the structure of the hydroxyapatite crystals. If fluoride ions are present during the remineralisation, through water fluoridation or the use of fluoride-containing toothpaste, the stronger and more acid-resistant fluorapatite crystals are formed instead of the hydroxyapatite crystals.




  • Long enough to accept it. Lots of reasons that ultimately add up to being an inadequate person, but also no transportation/income in a semi-rural area (also health/personality issues) so I’m a shut-in and thus don’t ever meet people. That said, even in school/college it’s not like I ever really made strong connections with people, romantic or otherwise. Non-religious in USA (esp. given rural) certainly doesn’t (and more so didn’t) help with a dating pool either.

    And even if none of those were issues, I’m just not that interesting. I suspect the people who might like to be around me are probably also in their house more-often-than-not, and not within any distance/likelihood of meeting.



  • Huh, I’m using technology as an escape from woodworking. Lack of space/tools and a few times when I tried to do something the wood was too seasoned (last thing I tried was whittling hoping to do it in my room anytime and not have dust as an issue, cheap folding knife probably didn’t help)

    Well not fully true on the escape part, I just drop things really easy when I run into issues like that. Well that and I haven’t done anything noteworthy with technology or woodworking.


  • I just checked, apparently we have a ~16 gallon can (15 7/8ths*) and use 33gal bags. It doesn’t seem that much bigger (bc volume) but an overfilled bag will still have room in it when removed (it’s useful for last-minute additions on garbage day).

    I don’t know if you need to go this far, but maybe it is why they still fit the can properly with the not-expected-fit orientation like I described to prevent overfilling. 30gal might work, I guess it seems there isn’t much choice here though (otherwise I’d say try 5-10gal/~20% higher rather than double).

    *= Rubbermaid 3541, “Slim Jim” not cheap for plastic but we’ve had it for years so I’m not sure if it was that expensive when it was purchased



  • insomniac_lemon@kbin.socialtoProgramming@programming.dev...
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    6 months ago

    Yeah, the only language I’ve seen/tried that actually feels right*.

    But for me it falls down when it comes to needing other people and/or the specific engine-level stuff that I want to get started. I was hoping to start out simple with Raylib bindings, but even that I can’t get vertex colors on imported models to work and I tinkered w/my own 2D polygon format but it was too much work for me to finalize.

    My part of the fediverse doesn’t seem to work well for asking niche questions at least, I don’t see much talk on Nim and it doesn’t help that it’s hard to find when people don’t say nim-lang. Also there are 2 replies to you that aren’t federated to where I can see them (and my art threads–lowpoly+vertex colors, for instance plant–aren’t federated to your instance).

    *= That also may be a mix of my issues plus how some people style their code, though.