• j4k3@lemmy.world
    link
    fedilink
    English
    arrow-up
    19
    ·
    1 year ago

    Looks like PC’s are primed to make the evolutionary switch. The graphics card should mount to the case and the CPU is a card mounted on the graphics card.

  • HangryDadOf3@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    I built this as part of my Christmas present to myself last year. I cheaped out on my graphics card (6650xt) after splurging on a 4k 144hz Monitor. The 6650 did a great job for the most part but I had to use aggressive upscaling and dialed back alot of settings. I’m giving the card to my nephew today!

    • HangryDadOf3@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Thank you! And yes, it’s the TUF card from ASUS. Temps were very good during my brief tests and not even sure if I heard the fans kick on. Probably need to do a longer gaming session tho.

      I know there are much cheaper models but I liked the look of this one the best. Also I kept reading about fan noise and even problems with the thermal paste on cards like the red Devil and didn’t want to mess with any of that.

    • HangryDadOf3@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Ryzen 7950x and to be honest it’s complete overkill but it was a Black Friday deal and I couldn’t control myself at the time lol

  • Entheogen@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    So I have the Sapphire Nitro+, and was wondering if you have monitored your temps on idle?

    My temps creep up to 62C, then the fans kick on at about 30%, and cool it down to about 42C, rinse and repeat.

    It’s the oddest fan curve I have seen. Just wondering if yours act in a similar fashion, or if this is just how Sapphire programmed it. I have been waiting more than a month for a waterblock, and it looks to be a couple more weeks. I’ll be happy when it comes in, because then the fan curves will be a non-issue.

    • HangryDadOf3@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I’ll have to monitor it while this week and get back to you. I have seen people say that the fan curves are aggressive. I don’t mess with the settings too much but would undervolting help?

      • Entheogen@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        1 year ago

        I try to stay mostly on Linux, and voltage control hasn’t been exposed yet. I may go to my Windows drive and play with it, and test the results.

        The fan curves on mine aren’t necessarily aggressive, I just wish they were more constant, at a low level. Still, if you remember when you do, I would love to know how your curves are, out of sheer curiosity.

    • HangryDadOf3@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Quick update for you. I let the Adrenaline software run a log for about 3 hours while essentially doing nothing. It fluxed between 62 and 58C the entire time. I haven’t gotten into any really hard core gaming tests but my son playing Minecraft and me playing Diablo IV never got it above 69c. I’m not even sure if I heard the fans.

      • Entheogen@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I appreciate the update! Seems pretty similar to mine, so I’m guessing there a some similarities in the VBIOS. Thanks again!

    • HangryDadOf3@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      All are Corsair but the vertical fans are the LL series I believe which have the LEDs around the fan and are brighter overall. Don’t ask to see the cable management in the back 🤣