When I can’t sleep, I turn around and sleep “upside down” - moving my pillows to where my feet were beforehand, and my feet to where my head was beforehand - and I stick with that for a week or so. It gives me a week or so without insomnia and then wears off, so I have to turn myself back around for the next 7-12 day period.
Admittedly this could just be a me thing, but let’s put our faith in this method and let the power of placebo effect take hold. Boom, minor bouts of sleeplessness are cured.
What are your own examples of this?
Switch to linux
The only software holding me back is Adobe Premeire Pro; I’ve looked at the Linux alternatives and one of them has a windows 3.11 interface (KDEVine I think).
I’m still open to suggestions.
You could try Davinci Resolve. It’s great, professional-grade software, runs natively on Linux, and has a very generous free version and an inexpensive, one-time purchase studio version.
If it’s only one software you can test if it works on wine.
Will it work with wine?
I personally just went with blender sequencer because it is free softare though quite basic. Nuke might be a paid option. It is node based tho.
I don’t see what drinking has to do with anything but I’ll try.
Red or white? /s
One weird trick! Terminal still scares me as well as installing from GitHub, but I have win11 required at work and mint at home and the speed and ease of use are like night and day
Switched to codeberg as well. Microsoft owns github
I’m using gitlab-on-prem for now, until their slow code decay and creeping featurism destroys it completely. It’s only barely usable now because of the really dumb CI/runner changes, for example, but forgejo uses a yaml CI setup so that’s never happening.
Have a look at onedev.io. it’s local Git hosting but it includes cicd and even an issue tracker.
Its build/install fails best practice and ISO in so many places that I simply cannot.
But thank you for sending that over. I’ve never heard of that app, and I’m grateful for the consideration.
Not a Yaml fan?
I don’t hate Yaml. I’ll admit, I also don’t use it for much. Yaml’s job in my CICD is to tell me where I left the bash scripts for each step.
Heck no. I get paid to do a ansible in the daytime, and yaml and ansible are proof of society’s collapse; not just because they’re both so terrible, but because they are ever chosen despite the existence of so many alternatives.
Went to try three distros (Mint, Zorin, Ubuntu) all three either failed on boot (even just in the “try” state) or really really did not like my graphics card (Battlemage).
Could I go through and start troubleshooting, tweaking settings, making sure everything is configured correctly? Yes…. But after wasting a few hours just trying to get something to boot, “it just works” with Windows looks better all the time. I’m too old to want to jailbreak and tinker with shit.
Windows really hasn’t been the “it just works” option for a while. It’s just the option that you’ve gotten used to the bullshit to make it work. For example, the install process for every Linux distro I’ve tried is far simpler than the insane install process for Windows.
Like others have said though, you’re using the wrong distros for your hardware, without some manual work. I’d recommend CachyOS or Garuda Dragonized, as they’re made for gaming. They’re both Arch based, but they include everything you need out-of-the-box, so you really don’t need to put any effort into setting things up, only customizing it after.
One key thing with switching though is recognizing that you aren’t on Windows anymore. If you switch expecting it to be Windows then you’ll hate it. You need to go in with the same attitude you hade when you learned Windows (which you probably don’t remember). It’s something new. You have to accept that you have to learn how to use it.
All of these distros use an old ass kernel that might not support your hardware. Distros like Fedora and Arch (don’t use arch btw) use newer kernels and are more likely to support newer hardware.
Unfortunately Mint and Ubuntu (and maybe Zorin too, I don’t know about this one) stay on older kernels on purpose to maintain stability, and new hardware requires new kernels. Not only that, but mesa should also be ad updated as possible. I would normally not recommend this to someone who’s starting, but maybe give Manjaro a try. Maybe Bazzite is a better idea though, although I have never personally used it.
The reason why I don’t usually recommend Manjaro to people is that it’s bleeding edge, and that can cause problems. But in your case currently your hardware requires bleeding edge. Otherwise in a few months Ubuntu 26.04 should be released and I expect it will support your GPU better.
How is Battlemage. I’ve been thinking about getting a replacement for my Alchemist card. It’s mostly transcoding but it’s always nice to have backup hardware in these days.
i feel like in general there’s not usually much of a reason to upgrade after a single generation, regardless of the vendor, unless you have some very specific circumstances
yes, the b580 is good, but it’s not that good
I have a B580 and frankly it’s perfect for what I want. I run my games at 1440p and generally can get 60-90fps (depends if it supports XeSS 2). E33 was a decent benchmark and it passed just fine. I normally play slightly older games so it suits my needs.
As for transcoding, it can seriously knock it out. H.264 QSV with an RF of 22 on a 1080p stream averages 315fps. H.265 is a bit slower but still faster than realtime. It really is a transcoding powerhouse there.
I really want to and was mostly Windows free for most of 2025 but I can’t get my new graphics card to perform well in either kubuntu or mint. Games that will run on ultra at over 100fps in Windows will get 60-80fps on medium-high settings on kubuntu. A tear runs down my cheek every time I see people say they got performance increases from switching. Even my old hardware performed slightly worse.
Linux performance improvements are most noticeable on lower end hardware, at the higher end performance VS windows is usually pretty random from what I’ve seen.
That kind of makes intuitive sense, to me.
Early in the life of a piece of hardware, there’s lot of attention from individuals and companies.
Late in the life of a piece of hardware, only individuals still care about it.
Corporate OSes add changes over time to make old hardware worse off, while open OSes add fixes to support it.
Yeah, Linux generally supports older hardware for much longer, but it’s not only that. Linux devs are fairly attentive about performance, clean code, consistent frameworks, etc, meanwhile Microsoft is out there making random OS components in React just because it’s a little easier. From what I’ve heard the culture there is to not care about how something is done as long as it works.
Ubuntu and its derivatives are very slow with updates because they’re more focussed on stability. Because of this, your graphics drivers are likely wildly out of date. And if you’re using an Nvidia GPU, you’re better off going with a distro that has the graphics drivers built in.
I recommended going for a distro based on Fedora like Bazzite or Nobara. Fedora only lags a couple weeks behind updates for testing and QA, unlike the months/years you get on Ubuntu. Plus the 2 distros I mentioned have built-in Nvidia graphics drivers
I’m running an AMD GPU (9070XT) specifically because I knew it was meant to work nicer with Linux than my 1080 did.
I might give some other distros a try when I’ve got the time. It’s a shame, I really liked kubuntu. (I know I can configure most distros to do the things I liked about kubuntu but I’m not the most knowledgeable when it comes to that kind of thing.)
Running a 9070xt on cachyOS, works great
If memory serves you basically need the kernel release and stuff from like, December 2025? Somebody can correct me if that’s inaccurate.
I just installed CachyOS based off this recommendation, and performance is absolutely terrible right after installing. Do I need to install any drivers or change settings? Everything I see says that the drivers are baked into the kernel. But I am getting <50FPS with extreme stutters running the same settings I had on all the other OS’es I listed.
Drivers should be baked into the kernel, yeah, assuming the latest version was installed and regular updates ran after install to make sure all is up to date
Only extra thing I installed was the command that gave me steam and all the related gaming stuff, was a single line with gaming meta in it iirc.
What were you trying to test and on what resolution?
The game I’ve been playing lately is the Oblivion remaster. I know the game is known to have subpar performance, but in Windows with ultra settings and RT set to low I get 130+ FPS outdoors and 180+ indoors, in kubuntu I was getting ~60-80 outdoors and ~100 indoors, CachyOS got me 80 indoors and 50 outdoors with extreme stuttering.
All running on my 3440x1440 144hz monitor.
I just installed Bazzite, we’ll see how that plays.
Yeah, the newer card likely doesn’t have drivers added to the kernel version that Kubuntu uses yet
If it helps, Bazzite and Nobara have options to install with KDE Plasma included