Modern cars have MASSIVE digital displays, loads of computers systems monitoring every subsystem and internal diagnostics running to the OBDII ports.
Why the hell can’t we get diagnostic feeds on our console or infotainment center?
I’m not aware of any car manufacturers selling their own diagnostic ASICs, so it’s not an extra margin to squeeze afaik…
What gives? Any insight into this beyond the usual muh corporate profits conjecture?
Because FUCK YOU. That’s why.
Car companies want you to go back to the dealership to have codes read. They had to be sued into releasing the code’s meanings so independent shops and owners could do their own repairs.
Even though most car owners are knuckle draggers who don’t understand oil changes or air filter changes, they don’t want to make it any easier to do repairs outside of dealerships. I know someone who swears by dealerships and was very confused when I asked if he ever changed the air filter to improve fuel economy. For some reason, he thought his car didn’t have one.
Who is going to look at that stuff apart from technicians? Most users have no clue how the functionality of their vehicle is achieved and they don’t care.
For argument’s sake, let’s assume there is a userbase for this type of information. It would be possible to show diagnostic information like DTC or run DID routines from the dashboard but this is already possible from any cheap offboard tester, via a phone app or laptop.
The reality is that even if an OEM wanted to provide detailed diagnostic information, they don’t know it either because the information isn’t disclosed by their supply chain. Companies such as Bosch, who supply brake ECU, are extremely tight lipped about their intellectual property. When something goes wrong we use a special development version of the ECU to record the associated software variables during the fault and present that as evidence but we don’t have access to the source code.
Modern products are not designed to be repaired. They want us to continually buy new shit. Basically anything with software in it is an absolute nightmare to maintain. It makes me depressed just thinking about what a clusterfuck this landscape is.
Source: control system engineer for a large OEM.
I mean, I don’t think they’re taking about a full diagnostic. Just the code associated with a CEL.
It’d be nice if you could read the code from the dashboard or infotainment without digging out a code reader.
And it’d be even better if they had human readable descriptions for those codes, especially for OEM specific codes.For most people, a CEL is all you really need. But sometimes and for some people, just telling them the problem would be super helpful.
For example, a loose gas cap is a CEL. Save people $100 at the mechanic if it was just like “check that your gas cap is tight”Who is going to look at that stuff apart from technicians?
Anyone who owns expensive equipment and is serious about true ownership including all possible maintenance and repairs. Hi, I’m the guy who would be looking at it if it was visible without shitty dongles or 5-figure ASICs.
Tell your employer they could have share prices doing numbers if they did the slightest bit of QOL improvements for anyone remotely like me.
The same reason they won’t let you buy the dealership scan software for under 10k. Almost every maker has an in house scanner and due to standards they only need to provide certain data to non dealer level tools and I believe the standard only exists for gas powered vehicles that need to provide OBD2 data. Plenty of makers (BMW is horrible about this) stuff away data where a normal obd scanner just won’t access and it’s gotten much worse with the overuse of CANBus (I sure love when my trunk lid sensor prevents my fucking car from starting).
Thats where your snapon and other third party scanners start bringing a gap, but even those are extremely pricey and need to be updated constantly and even those usually won’t do EVERYTHING.
Fwiw the cheapest and best way I’ve found is basically to pirate the dealer software and get a compatible knockoff scanner (vxdiag for example). I have Ford IDS and a couple others this way but assume that the software is gonna install something malicious and dedicate an old Thinkpad or something to it.
Depending on the age of your vehicle something like Torque Pro is extremely useful. I have mine monitoring transmission temp, long and short term fuel trims, O2 sensor signals, voltage, mass air speed, intake temp. It’s more than enough data to see something coming long before it becomes an issue.
If you have a Ford, there’s free software called Forscan that will perform all of the duties of the dealer service software. I used it when I replaced my wife’s ABS module on her Edge. You can even use it to program keys and modify things.
Yep FORScan let me set the VIN on an electronic power steering rack (because that’s totally cool to require so you can’t just replace it at home right?).
I beleive it is actually IDS just reverse engineered and more accessible, unfortunately not every maker has one of those out there it really should be legally required when you buy the car to at least get the software to “own” it.
Yeah I was so psyched when I came across it while trying to diagnose the ABS issue. I searched for something similar for Toyota and Chevy for our other cars but was bummed that nothing like it exists for either one.
We could have had readable diagnostics since they started showing multiple items on the in-dash LCDs. It’s always money.
Even OBD1 cars had that in the form of a blinking check engine light.
Shit, it works for my furnace 😅
Our 85 Thunderbird used to blink a set of numbers out. But you still had to have some type of information to make use of it
As someone pointed out on the comment, one of the reason is Money, the other one is safety and security
based on Vehicle manufacturer claim.Yet, nobody can stop you to sniff and monitor your own car CAN/OBD2 interface using as simple as cheap microcontroller and compatible OBD2 interface kit (e.g CAN Transceiver/Controller kit).
EDIT: So far this curated list helpful to me for CAN bus based protocol.
As other mentioned cheap ODB2 readers, but some brands offer a lot of diagnostic data over the infotainment system, they just won’t display them to you - for BMW I use AAIdrive (is foss, github/AAIdrive) and it displays some of the data on the main screen without a physical ODB2 reader inserted.
(And ofc custom navigation, VLC, etc)I am going to spend my holiday break looking into this, thank you very much!
What I’ve learned with 15 years in the DIY repair sphere is that (obviously to me) the codes don’t tell you what’s at fault, only what’s not reading correctly and (to my surprise) the general public will just replace what the code says is off. A MAF code doesn’t tell you if it’s the sensor, the wiring, or the PCM.
While I’d certainly appreciate a simple code readout because I’m pretty knowledgeable about which are actually concerning this moment vs this year vs never, diagnosis typically takes more equipment and time. The cost and hassle of the reader is negligible in the repair. I use a Bluetooth dongle and Torque app to read all kinds of stats when diagnosing. An integrated interface would be convenient in some ways, but the portability of a phone/tablet probably has an equal amount of convenience once hard diag is needed
Money
I don’t know if that’s the reason but it probably is
I’m guessing government regulation.
This feature is a no-brainer. Whenever there’s a feature the market would love (and hence pay for) the reason it isn’t there is the government doesn’t allow it.
It’s almost always the reverse.
Regulation is what forced manufacturers to provide standard error codes over a standard protocol using a standard socket, so that people could self diagnose their car problems without getting locked into their dealership mechanic
The sad answer is that those displays exist to cut costs, not to make your ownership experience better.
Also the dealers want you to come to them for that CEL, and the companies don’t want to piss off the dealers.
They make the ownership experience worse. I fucking hate mine.
I wish I could replace half of the real estate with buttons and.knobs but nooooo, I can’t afford a car with such fancy craftsmanship so it’s a cheap shitty screen with a cheap shitty OS instead. And everyone things it’s fancy…LOL
I like my Infiniti because it has both a screen and knobs / buttons
As does my ram
Nice! I’m glad other brands are still sane. Nissan is moving towards all-screen and I think that’s my cue to leave them.
Iirc there was a push on manufacturers from the NHTSA to return to physical controls for things like HVAC and media due to safety concerns, but I don’t know how official that was.
Just to throw this out there, but car dealership owners are close to the scummiest people on the planet.
Yes
My spouse used to work in the industry. I can confirm your take with first hand experience 😮💨
They don’t call them Stealerships for nothing.
Why don’t the companies want to piss off the dealers? Is some Toyota dealership really gonna stop selling Toyotas because a Toyota comes out with a self-diagnosis feature?
The dealers have a shocking amount of power in the US
And most of their money comes from parts and service.
They probably don’t want YOU to be the one diagnosing.
There is a standard connector which existed before big screens landed in cars, the OBD2 connector. Dongles are cheap and you can read the output from your phone or computer. Some dongles support bluetooth. The connector is mandated in some markets and I guess that makes it less interesting to add a redundant interface inside of the car. It’s fun to try if you’re interested. Manufacturers can extend the error codes IIRC.
Tesla has a service mode on the display through which you can scan the car for faults, run a battery test, … It is password protected but the password is publicly available.
Interesting fact. OBDII is a CARB requirement, so it’s tied to cars that must meet emissions standards. This is why Teslas don’t need to include one (ands it likely other manufacturers will stop including them in their electric models at some point as well). No emissions systems to check means no need for an OBDII port.
Usually I wouldn’t be that guy, but it’s OBD2, not ODB2.
OBD - On Board Diagnostics
Updated my comment to reflect this. Thanks for clearing out the confusion.
Once it may have been called ALDL instead. My '95 Commodore has one. Assembly Line Diagnostic Link. Same physical connector.
ALDL was proprietary to GM kind of like apple and their connector tomfoolery. In 1990-something CARB probably didn’t want to buy all the different diagnostic tools so they said if you want to drive in California your car needs OBD-II. Now, I can check and clear codes on any modern car with a $35 tool.
deleted by creator
Bingo! You can get a BT adapter for $7 on eBay. Torque is the absolute killer app. I’m stunned something so complete and customizable is free, a few bucks for the full version. I suck at mechanics, but that has saved my butt a time or two.
If you own a car that was made in the last several decades, it has the OBDII connector under the steering wheel and openly accessible. You just plug the adapter in and connect to your phone. The adapter and app are every bit as important to me as a jack, lug wrench and tire pump. No one should be without for a measly $20.
My wife’s car occasionally throws an error that kills the cruise control. She can clear the error code while I’m driving! If you have ever had a mysterious check engine light, you can see exactly what it means.
Torque is ancient and not supported on current versions of Android.
I’ve been using Piston for a long time and I’ve been happy with it
Yeah that’s what it said for me when I clicked that playstore link. Apparently my 4 year old phone is too new to use the app.
This is totally it. Car is already required to support OBDII, adding the ability to display diagnostic info to the screen costs more.
Yeah, particularly it costs more, which you would need customers to want to pay for. If those same customers can just get an OBD-2 connector for a fraction of the upcharge, that’s not gonna work out…
They want you going to the dealer, so they can upsell more maintenance and repair costs.
P r o f I t
Correct, but in the opposite way. Teslas have a service mode and Tesla is the most valuable car manufacturer.
Yo it’d be sick af to root your cars dash and load some OS onto it and have your own console!
ODB2 into a raspberry pi or a breadboard somehow, get some sick diagnostics application whipped up.
Here’s to projects I’ll never tackle.
I had an old Android tablet running Torque in my dash where the radio used to be. Adapter and phone app, $20.
I have a couple of those OBDongles that pair over BT, honestly the interface leaves a lot to be desired.
Hondas infotainment is just android. And at least on my friends 2017 Civic you could get to the regular ass android interface. Most of them are some flavor of Linux.
Also you can install whatever head unit you want on most cars. You can even buy a head unit from china that will match your cars trim for like $300 from china.
I admire your creativity!
Cheers
